steel profile
H588x300x12x20
Dimensions and technical properties from the source catalogue are shown below.
- Catalogue
- Nippon JIS H
- Standard
- JIS G 3192; JIS G 3136
- Source publication
- Nippon Steel Structural Shapes
Dimensions, weight and technical properties
| Property | Value | Unit |
|---|---|---|
| h | 588 | mm |
| b | 300 | mm |
| t_w | 12 | mm |
| t_f | 20 | mm |
| r_1 | 13 | mm |
| g | 147 | kg/m |
| A | 18720.0 | mm² |
| I_x | 1140.00 | 10⁶ mm⁴ |
| I_y | 90.10 | 10⁶ mm⁴ |
| i_x | 247.0 | mm |
| i_y | 69.40 | mm |
| W_el,x | 3890 | 10³ mm³ |
| W_el,y | 601 | 10³ mm³ |
| W_pl,x | 4350 | 10³ mm³ |
| W_pl,y | 921 | 10³ mm³ |
| I_t | 1990 | 10³ mm⁴ |
| d | 522.0 mm [PDF] | |
| 7.50 | ||
| 43.5 | ||
| u | 0.886 | |
| x | 31.2 | |
| H | 7 cm⁶ [PDF] | |
| nS | ||
| S | ||
| C | ||
| C | ||
| c1 | ||
| c4 | ||
| c1 | ||
| c1 |
Source notes and corrections
Source H unit scale is unresolved; not a normalized warping constant.
Source d, ratios, u, x and classifications are retained for reference only, never used for substitution.
Page 32 repeats inconsistent d and slenderness values in 39 rows; no guessed corrections.
Imperial d is labelled mm in the PDF; no inferred unit correction.
H588x300x12x20 · Equivalent profile search
Use this profile’s current section properties to fill the substitution tool criteria. Alternatives are calculated when you start the search.
Equivalent profile ↗