steel profile
HL 1000 M
Dimensions and technical properties from the source catalogue are shown below.
Profile name variants: HL 1000 M · HL1000M
- Catalogue
- Nippon HL
- Standard
- EN 10365
- Source publication
- Nippon Steel Structural Shapes
Dimensions, weight and technical properties
| Property | Value | Unit |
|---|---|---|
| h | 1008 | mm |
| b | 402 | mm |
| t_w | 21.1 | mm |
| t_f | 40.0 | mm |
| r_1 | 30.0 | mm |
| g | 412 | kg/m |
| A | 52510.0 | mm² |
| I_x | 9100.00 | 10⁶ mm⁴ |
| I_y | 434.00 | 10⁶ mm⁴ |
| i_x | 416.0 | mm |
| i_y | 90.90 | mm |
| W_el,x | 18100 | 10³ mm³ |
| W_el,y | 2160 | 10³ mm³ |
| W_pl,x | 20500 | 10³ mm³ |
| W_pl,y | 3350 | 10³ mm³ |
| I_t | 21400 | 10³ mm⁴ |
| d | 868.0 mm [PDF] | |
| 4.01 | ||
| 41.1 | ||
| u | 0.886 | |
| x | 27.1 | |
| H | 102.0 cm⁶ [PDF] | |
| nS | ||
| S | ||
| C | ||
| C | ||
| c1 | ||
| c4 | ||
| c1 | ||
| c1 |
Source notes and corrections
Source H unit scale is unresolved; not a normalized warping constant.
Source d, ratios, u, x and classifications are retained for reference only, never used for substitution.
Page 32 repeats inconsistent d and slenderness values in 39 rows; no guessed corrections.
Imperial d is labelled mm in the PDF; no inferred unit correction.
HL 1000 M · Equivalent profile search
Use this profile’s current section properties to fill the substitution tool criteria. Alternatives are calculated when you start the search.
Equivalent profile ↗