steel profile
IPE O 500
Dimensions and technical properties from the source catalogue are shown below.
Profile name variants: IPE O 500 · IPEO500
- Catalogue
- Nippon IPE Standard
- Standard
- EN 10365
- Source publication
- Nippon Steel Structural Shapes
Dimensions, weight and technical properties
| Property | Value | Unit |
|---|---|---|
| h | 506 | mm |
| b | 202 | mm |
| t_w | 12.0 | mm |
| t_f | 19.0 | mm |
| r_1 | 13.0 | mm |
| g | 105 | kg/m |
| A | 13440.0 | mm² |
| I_x | 566.00 | 10⁶ mm⁴ |
| I_y | 26.20 | 10⁶ mm⁴ |
| i_x | 205.0 | mm |
| i_y | 44.10 | mm |
| W_el,x | 2240 | 10³ mm³ |
| W_el,y | 259 | 10³ mm³ |
| W_pl,x | 2560 | 10³ mm³ |
| W_pl,y | 406 | 10³ mm³ |
| I_t | 1270 | 10³ mm⁴ |
| d | 815.0 mm [PDF] | |
| 5.48 | ||
| 42.2 | ||
| u | 0.874 | |
| x | 28.4 | |
| H | 1.6 cm⁶ [PDF] | |
| nS | ||
| S | ||
| C | ||
| C | ||
| c1 | ||
| c4 | ||
| c1 | ||
| c1 |
Source notes and corrections
Source H unit scale is unresolved; not a normalized warping constant.
Source d, ratios, u, x and classifications are retained for reference only, never used for substitution.
Page 32 repeats inconsistent d and slenderness values in 39 rows; no guessed corrections.
Imperial d is labelled mm in the PDF; no inferred unit correction.
IPE O 500 · Equivalent profile search
Use this profile’s current section properties to fill the substitution tool criteria. Alternatives are calculated when you start the search.
Equivalent profile ↗