steel profile
HL 1000x748
Dimensions and technical properties from the source catalogue are shown below.
Profile name variants: HL 1000x748 · HL1000x748
- Catalogue
- Nippon HL
- Standard
- EN 10365
- Source publication
- Nippon Steel Structural Shapes
Dimensions, weight and technical properties
| Property | Value | Unit |
|---|---|---|
| h | 1068 | mm |
| b | 417 | mm |
| t_w | 39.0 | mm |
| t_f | 70.0 | mm |
| r_1 | 30.0 | mm |
| g | 748 | kg/m |
| A | 95340.0 | mm² |
| I_x | 17300.00 | 10⁶ mm⁴ |
| I_y | 851.00 | 10⁶ mm⁴ |
| i_x | 426.0 | mm |
| i_y | 94.50 | mm |
| W_el,x | 32400 | 10³ mm³ |
| W_el,y | 4080 | 10³ mm³ |
| W_pl,x | 37900 | 10³ mm³ |
| W_pl,y | 6460 | 10³ mm³ |
| I_t | 116000 | 10³ mm⁴ |
| d | 868.0 mm [PDF] | |
| 2.27 | ||
| 22.3 | ||
| u | 0.881 | |
| x | 16.2 | |
| H | 212.0 cm⁶ [PDF] | |
| nS | ||
| nS | ||
| C | ||
| C | ||
| c1 | ||
| c1 | ||
| c1 | ||
| c1 | ||
| ＊ |
Source notes and corrections
Source H unit scale is unresolved; not a normalized warping constant.
Source d, ratios, u, x and classifications are retained for reference only, never used for substitution.
Page 32 repeats inconsistent d and slenderness values in 39 rows; no guessed corrections.
Imperial d is labelled mm in the PDF; no inferred unit correction.
HL 1000x748 · Equivalent profile search
Use this profile’s current section properties to fill the substitution tool criteria. Alternatives are calculated when you start the search.
Equivalent profile ↗