steel profile
IPE 500
Dimensions and technical properties from the source catalogue are shown below.
Profile name variants: IPE 500 · IPE500
- Catalogue
- Nippon IPE Standard
- Standard
- EN 10365
- Source publication
- Nippon Steel Structural Shapes
Dimensions, weight and technical properties
| Property | Value | Unit |
|---|---|---|
| h | 500 | mm |
| b | 200 | mm |
| t_w | 10.2 | mm |
| t_f | 16.0 | mm |
| r_1 | 13.0 | mm |
| g | 88.9 | kg/m |
| A | 11320.0 | mm² |
| I_x | 470.00 | 10⁶ mm⁴ |
| I_y | 21.40 | 10⁶ mm⁴ |
| i_x | 204.0 | mm |
| i_y | 43.50 | mm |
| W_el,x | 1880 | 10³ mm³ |
| W_el,y | 214 | 10³ mm³ |
| W_pl,x | 2140 | 10³ mm³ |
| W_pl,y | 333 | 10³ mm³ |
| I_t | 770 | 10³ mm⁴ |
| d | 815.0 mm [PDF] | |
| 5.48 | ||
| 42.2 | ||
| u | 0.874 | |
| x | 33.2 | |
| H | 1.3 cm⁶ [PDF] | |
| nS | ||
| S | ||
| C | ||
| C | ||
| c1 | ||
| c4 | ||
| c1 | ||
| c1 |
Source notes and corrections
Source H unit scale is unresolved; not a normalized warping constant.
Source d, ratios, u, x and classifications are retained for reference only, never used for substitution.
Page 32 repeats inconsistent d and slenderness values in 39 rows; no guessed corrections.
Imperial d is labelled mm in the PDF; no inferred unit correction.
IPE 500 · Equivalent profile search
Use this profile’s current section properties to fill the substitution tool criteria. Alternatives are calculated when you start the search.
Equivalent profile ↗