steel profile
H350x350x12x19
Dimensions and technical properties from the source catalogue are shown below.
- Catalogue
- Nippon JIS H
- Standard
- JIS G 3192; JIS G 3136
- Source publication
- Nippon Steel Structural Shapes
Dimensions, weight and technical properties
| Property | Value | Unit |
|---|---|---|
| h | 350 | mm |
| b | 350 | mm |
| t_w | 12 | mm |
| t_f | 19 | mm |
| r_1 | 13 | mm |
| g | 135 | kg/m |
| A | 17190.0 | mm² |
| I_x | 398.00 | 10⁶ mm⁴ |
| I_y | 136.00 | 10⁶ mm⁴ |
| i_x | 152.0 | mm |
| i_y | 88.90 | mm |
| W_el,x | 2280 | 10³ mm³ |
| W_el,y | 776 | 10³ mm³ |
| W_pl,x | 2520 | 10³ mm³ |
| W_pl,y | 1180 | 10³ mm³ |
| I_t | 1860 | 10³ mm⁴ |
| d | 286.0 mm [PDF] | |
| 9.21 | ||
| 23.8 | ||
| u | 0.847 | |
| x | 18.0 | |
| H | 3.7 cm⁶ [PDF] | |
| nS | ||
| nS | ||
| C | ||
| C | ||
| c2 | ||
| c1 | ||
| c2 | ||
| c1 |
Source notes and corrections
Source H unit scale is unresolved; not a normalized warping constant.
Source d, ratios, u, x and classifications are retained for reference only, never used for substitution.
Page 32 repeats inconsistent d and slenderness values in 39 rows; no guessed corrections.
Imperial d is labelled mm in the PDF; no inferred unit correction.
H350x350x12x19 · Equivalent profile search
Use this profile’s current section properties to fill the substitution tool criteria. Alternatives are calculated when you start the search.
Equivalent profile ↗