steel profile
HL 1000x483
Dimensions and technical properties from the source catalogue are shown below.
Profile name variants: HL 1000x483 · HL1000x483
- Catalogue
- Nippon HL
- Standard
- EN 10365
- Source publication
- Nippon Steel Structural Shapes
Dimensions, weight and technical properties
| Property | Value | Unit |
|---|---|---|
| h | 1020 | mm |
| b | 404 | mm |
| t_w | 25.4 | mm |
| t_f | 46.0 | mm |
| r_1 | 30.0 | mm |
| g | 483 | kg/m |
| A | 61510.0 | mm² |
| I_x | 10700.00 | 10⁶ mm⁴ |
| I_y | 507.00 | 10⁶ mm⁴ |
| i_x | 417.0 | mm |
| i_y | 90.80 | mm |
| W_el,x | 20900 | 10³ mm³ |
| W_el,y | 2510 | 10³ mm³ |
| W_pl,x | 23900 | 10³ mm³ |
| W_pl,y | 3920 | 10³ mm³ |
| I_t | 33100 | 10³ mm⁴ |
| d | 868.0 mm [PDF] | |
| 3.46 | ||
| 34.2 | ||
| u | 0.883 | |
| x | 23.8 | |
| H | 120.0 cm⁶ [PDF] | |
| nS | ||
| nS | ||
| C | ||
| C | ||
| c1 | ||
| c3 | ||
| c1 | ||
| c1 |
Source notes and corrections
Source H unit scale is unresolved; not a normalized warping constant.
Source d, ratios, u, x and classifications are retained for reference only, never used for substitution.
Page 32 repeats inconsistent d and slenderness values in 39 rows; no guessed corrections.
Imperial d is labelled mm in the PDF; no inferred unit correction.
HL 1000x483 · Equivalent profile search
Use this profile’s current section properties to fill the substitution tool criteria. Alternatives are calculated when you start the search.
Equivalent profile ↗